We manufacture and supply mould and mould-base accessories, press-tool accessories and industrial die springs. Our range includes mould ejection and alignment components, ejector pins, guide pins and bushes, slide retainers, mould latches, cooling accessories, piercing punches, polyurethane elastomers, ball cages and related tooling components.
Yes. We manufacture, supply and export precision components used in moulds, dies and press tools. We support standard requirements as well as feasible drawing-based components for tool rooms, mould makers, press-tool manufacturers, injection moulders and engineering buyers.
We are located in Bhayandar, Thane, Maharashtra, close to Mumbai’s industrial and logistics network. Buyers can contact us for product selection, quotations, samples, order planning and domestic or export supply requirements.
We have served the injection moulding, die-casting, compression moulding, press-tool and engineering industries since 1999. Our experience helps us understand both routine replacement needs and application-specific component requirements.
You can source mould and mould-base accessories, mould ejection-system components, mould alignment products, slide retainers, mould latches, parting locks, date indicators, cooling products, sprue bushes, mould bases, mould sprays, mould counters, polishing tools, piercing punches, polyurethane elastomers, ball cages and die springs.
We have the machinery and production setup to handle regular, repeat and bulk requirements. Actual capacity depends on the component type, dimensions, material, machining operations, heat treatment, inspection level and delivery schedule. Share your quantity and target date so we can confirm a practical production plan.
Yes. We can plan bulk and high-volume orders after reviewing the product specification, quantity, required batches and delivery schedule. For recurring demand, send a monthly or annual forecast so we can plan raw material, machining, inspection and dispatch more efficiently.
We supply components used in injection moulding, plastic mould making, die casting, compression moulding, press tools, sheet-metal tooling, automotive components, packaging, electrical products, appliances, general engineering and tool-room applications. Final suitability is confirmed against the buyer’s drawing and operating conditions.
Our products are used for part ejection, mould alignment, guided movement, slide retention, parting control, cooling, sprue formation, production counting, date identification, piercing, punching, spring loading, polishing and mould maintenance. We recommend selecting each component according to load, movement, temperature, cycle and tolerance requirements.
Yes. You can combine compatible requirements such as ejector pins, guide components, retainers, latches, cooling accessories, punches, ball cages and die springs in one enquiry. A consolidated item list with drawings, quantities and required dates helps us quote and plan the order correctly.
Yes, drawing-based manufacturing can be evaluated. Please send a dimensioned 2D drawing or 3D model together with material grade, hardness, critical tolerances, surface finish, quantity and inspection requirements. Incomplete drawings may require clarification before quotation.
Start with the component function, dimensions, fit, material, hardness, load, movement, operating temperature, cycle frequency and expected service life. Share your drawing or existing specification with us, and we will help you shortlist a suitable standard or customised option.
Tolerance capability varies by geometry, size, material, heat treatment, grinding and finishing process. Mark critical and non-critical dimensions clearly on the drawing. We review the complete specification and confirm achievable tolerances before production.
Yes, urgent requirements can be reviewed against current stock, raw-material availability and production load. Mark the enquiry as urgent and send the exact drawing, quantity, machine or mould status, delivery location and required date so we can confirm the earliest practical option.
We control quality through material selection, process checks, dimensional inspection and final verification according to the product and agreed specification. Buyers should state critical dimensions, tolerances, hardness, surface finish and required documents in the RFQ so the inspection plan matches the application.
Yes, inspection-report requirements can be reviewed at the quotation stage. Tell us which dimensions must be recorded, the required sampling level and whether you need a standard inspection report, first-article report or full dimensional report.
We manufacture applicable products to relevant AISI, DIN, ISO or JIS requirements when the required standard is clearly specified. Standards differ by component, so please mention the exact designation, revision, material and dimensions in your RFQ. We will confirm compliance before order acceptance.
Our products are developed to meet relevant AISI and DIN/ISO quality requirements where applicable. If your purchase requires a current company-level certificate, product compliance statement or test document, specify it in the RFQ and we will confirm the exact document available for that order.
Yes, for suitable customised orders we can agree on drawing confirmation, sample approval or first-article inspection before bulk production. The approval route, sample quantity, cost and additional lead time should be finalised during quotation.
We select packing according to the product size, finish, quantity and transport method. Buyers can request individual wrapping, rust-preventive protection, labelled packs, reinforced cartons, wooden cases or export-grade packing when required.
Contact us promptly with the invoice or order reference, product label, photographs, measurements and a clear description of the issue. We will review the supplied specification and evidence, then advise the appropriate correction, replacement or commercial resolution under the agreed terms.
Send your requirement through our website enquiry form, email, phone or WhatsApp. Include the product name, drawing or size, material, quantity, delivery location and required date. We will review the technical details and issue a quotation for your confirmation.
Warranty or replacement support depends on the product, application and agreed commercial terms. Before ordering, confirm the warranty period, manufacturing-defect coverage, exclusions, storage and installation conditions, and the claim procedure in writing.
Disclaimer: Product information, specifications, grades, images and applications are for general reference only and may vary by product and requirement. Please confirm final specifications and suitability with our team before ordering. © 2026 Vardhman Dies & Mould Tools. All Rights Reserved. Unauthorised copying or reuse of website content is prohibited. Terms of Use | Privacy Policy | [email protected]